Double programmable temperature alarm (two exhausts) or (exhaust and engine) or (two engines)

Engine temperature alarm:

(two exhausts) or (exhaust and engine) or (two engines) programmable, combines two sensors with the CPU with independent double programming.

Options:

12V or 24V.

1st CONTROL TWO EXHAUSTS.

2nd CONTROL ONE EXHAUST AND ENGINE BLOCK.

3rd CONTROL TWO ENGINE BLOCKS.

You can be monitoring the temperature of your engine continuously but at the slightest carelessness you will find yourself with an overheated engine

And possibly with a very expensive breakdown.

You no longer have to worry about the temperature of your engine, the Seymo control will do it for you,

Warning you with an alarm sound when the temperature exceeds the one you set.

Programmable temperature control for (two exhausts) or (exhaust and engine) or (two engines)

Boat

The engine temperature sensor with its perforated terminal fits like a washer under any screw, which is near the cylinder head or engine block and the exhaust sensor fits on the exhaust pipe or elbow

Specifications:

You do not need to know the engine temperature specifications to set the overheat alarm.

Simply observe the highest temperature your engine reaches during normal navigation, and then set the alarm to sound above this.

Programming the maximum alarm temperature, when this is exceeded, it will warn acoustically and visually, thus avoiding damage to the engine.

Example for engine: if the digital display indicates 84 degrees (normal engine operating temperature) and we program 85, when this temperature is reached the alarm will be activated.

The cylinder head gasket only needs two temperature increases to melt

It acts before the engine itself does, increasing safety and avoiding very costly breakdowns

Temperature in the exhaust pipe, advantages of this equipment over those on the market:

Easy assembly without removing any part of the exhaust, open the clamp and place it around the pipe or elbow and that's it.

Programmable, it adapts to any exhaust

Test the operation, without having to overheat the engine

The sensor is not in contact with sea water and exhaust gases

Reduced price

Operation:

Set the maximum exhaust temperature, to set the overheating alarm. Simply observe

the highest temperature that your exhaust reaches during normal navigation, and then set the alarm

So that it sounds above this.

Example for exhaust: if the digital display indicates 84 degrees (normal operating temperature of the exhaust pipe) and we set it to 85, when this temperature is reached the alarm will be activated.

Exhaust alarm: if the flow of sea water is insufficient for any reason, the temperature in the exhaust pipe will rise above the programmed temperature and the alarm will warn acoustically and visually, giving time to reduce speed, stop the engine, avoiding damage and very costly repairs to the engine.

Detects any anomaly in the engine operation by temperature:

Lack of cooling water in closed circuit

Leaking hoses

Faulty thermostat

Oil at inadequate temperature

Lack of seawater flow (Boats)

Exhaust pipe diameter:

continuous 316 stainless steel clamp from 30 to 310mm

Example: from 30 to 310 mm, this closes up to 30mm and its maximum diameter is 310mm

If you do not know the diameter of the exhaust pipe, you can measure the circumference around the pipe in mm and divide by 3.142

Example: for a circumference of 500 mm

500mm: 3.142 = 159.1mm, it would be within the range between 30 and 310mm

Connections: 12V or 24V power supply

The probe to the engine block on any screw.

The exhaust probe around the exhaust pipe or elbow.

Features:

12V or 24V power supply

Double alarm temperature programmable from 0 to 120 degrees

0.1 degree resolution

Acoustic alarm exceeding programmed temperature

Visual alarm with LED on the display

Optional external buzzer

Optional external siren

2.5 meter probe cable (you can add up to 100 meters of cable extension of 2x0.75mm minimum diameter)

Mounting: recessed and surface

Dimensions L x D x H = 74x70x34mm

Included:

Complete alarm for installation

CPU display with internal buzzer

2.5 meter wiring (extendable up to 100 meters with 2x0.75mm cable)

Installation manual

SELECT THE OPTION BEFORE ADDING TO CART:

12V or 24V

Option1 two exhaust probes

Option2 exhaust probe and probe engine

Option 3 two engine probes