Programmable temperature outboard motor alarm
140,00 €
Inkl. mva
Programmable temperature control for outboard motor
Programmable temperature control for outboard motor You can be constantly monitoring the temperature of your engine, but at the slightest carelessness you will find yourself with an overheated engine And possibly with a very expensive breakdown You no longer have to worry about the temperature of your engine, the Seymo control will do it for you, Alerting you with an alarm sound when the temperature exceeds the one you set The temperature sensor with its perforated terminal fits like a washer under any screw, which is near the cylinder head or the engine block
.jpg)
Operation:
You do not need to know the engine temperature specifications to set the overheat alarm.
Simply observe the highest temperature your engine reaches during normal driving, and then set the alarm to sound above this
Setting the maximum alarm temperature, when this is exceeded, it will warn acoustically and visually, thus avoiding damage to the engine
Example: if the digital display indicates 84 degrees (normal engine operating temperature) and we set 85, when this temperature is reached the alarm will be activated
The cylinder head gasket only needs two temperature increases to melt
It acts before the engine itself does, increasing safety and avoiding very costly breakdowns
Detects any anomaly in the engine operation due to temperature
Lack of cooling water
Leaking hoses
Faulty radiator
Faulty thermostat
Oil at inadequate temperature
Lack of seawater flow (Boats)
Connections: 12V power supply
the probe to the engine block on any screw
Characteristics
Power supply 12v optional 24v
Waterproof dial
Programmable alarm temperature from 0 to 120 degrees
Continuous digital temperature monitoring
Resolution 0.1 degree
Acoustic alarm exceeding programmed temperature
Visual alarm with LED on the display
Optional external buzzer
Optional external siren
2.5 meter probe cable with 1 meter of spiral for free movement of the motor (you can add up to 100 meters of cable extension of 2x0.75mm minimum diameter)
Mounting: recessed and surface
Dimensions. L x D x H = 74x70x34mm
Included:
Complete alarm for your installation:
CPU display with internal buzzer
Probe
2.5 meter wiring (extendable up to 100 meters with 2x0.75mm cable)
Installation manual.
RT610/RT611
Kommentarer (0)
Ingen kundeanmeldelser enda.
16 andre produkter i samme kategori:
Programmable temperature control for outboard motor