Programmable engine exhaust temperature alarm

Description:

Detects high temperatures in the exhaust pipe when not enough seawater flows

Provides acoustic and visual warning of high temperatures before the engine itself does

Increasing safety

Programmable temperature to adapt to all types of engines

Installed on the exhaust pipe with the clamp and its built-in sensor

Advantages of this equipment over those on the market:

Easy assembly without removing any part of the exhaust, open the clamp and place it around the pipe or elbow and that's it.

• Programmable, adapts to any engine
• Test operation without overheating the engine
• The sensor is not in contact with water and smoke
• Price
•  
• Operation:
•  
• Set the maximum exhaust temperature to adjust the overheating alarm. Simply observe
•  
• The highest temperature your exhaust reaches during normal navigation, and then set the alarm
•  
• So that it sounds above this
•  
• Programming the maximum alarm temperature, when this is exceeded, it will warn acoustically and visually, thus avoiding damage to the engine
•  
• Detects
•  
• Lack of seawater flow (Boats)
• High temperature in the engine
• Connections:
•  
• 12V or 24V power supply
• Connection to elbow or exhaust pipe
•  
• Characteristics
•  
• 12v power supply optional 24v
• Programmable alarm temperature from 0 to 115 degrees
• Continuous digital temperature monitoring
• Resolution 0.1 degree
• Acoustic alarm exceeding programmed temperature
• Visual alarm with LED on the display
• Optional external buzzer
• Optional external siren
• Mounting: recessed and surface
• Dimensions x P x H = 74x70x34mm
• Temperature sensor with clamp and 2.5 meters of cable (you can add up to 100 meters of cable extension of 2x0.75mm minimum diameter
•  
• Available diameters:
• continuous 316 stainless steel clamp from 30 to 310mm
• Note: select the working voltage 12 or 24 Volts from the top menu
•  
• Example: from 30 to 310 mm, this closes up to 30mm and its maximum diameter 310mm
•  
• If you do not know the diameter of the tube, you can measure the circumference around the tube in mm and divide by 3.142
•  
• Example: for a circumference of 500 mm
•  
• 500mm: 3.142 = 159.1mm, it would be within the range between 30 and 310mm
•  
• Included:
•  
• Complete alarm for your installation:
• CPU display with internal buzzer
• Sensor
• 2.5 meter wiring (extendable up to 100 meters with cable 2x0.75mm)
• Installation manual