Wireless programmable 4 zone bilge alarm

Why install a Seymo bilge alarm?

It is specially designed to detect water leaks with immediate warning where the water inlet is.

Detecting a water leak in time gives you many possibilities to save the boat and preserve the safety of your crew.

Alarm with programmable microprocessor for detecting water inlet in boats.

Simple connection does not require installation, the sensors work with a battery, they do not need cables,

Programmable from the Android App, you can change the name of the zones, for a quick location.

Display where the water inlet zone and acoustic alarm are indicated

Installation:

It is installed in the areas where water can enter, bilge, bottom taps, drains, horn, etc.

Zone 1 for example: stern taps, and so on the other zones, for easy and quick identification.

Android App configuration

Operation:

When connected, it performs a test of the acoustic warning devices and begins to monitor the zones.

Each time one of the 4 sensors detects the presence of water, with a 5 second delay to avoid false alarms, it will activate the acoustic alarm inside and outside the display, and the programmed zone will appear (example stern taps).

This will give you an immediate response where the water inlet is originating, and so on with the following alarm zones, which will be displayed one after the other.

You can silence the alarm, or reset it and it will start monitoring all the zones again.

Connections:

Display 2 positive and negative connections at 12 or 24 Volts and an extra output to connect an external acoustic alarm.

4 electronic wireless zone sensors with no moving parts.

Sensors: RF. 12v A23 long-lasting battery.

Dimensions:

CPU/Display: 12x8x3 cm.

Sensors: 6x5x2 cm.

Includes:

4 sensors, batteries not included.

CPU/Display.

Internal and external acoustic indicator.

Documentation: