Programmable engine temperature control
Boat
Vehicle
Caravan
Truck
etc...
Why should you install a Seymo programmable temperature control?
Seymo measures the temperature of your engine continuously, warning you before overheating
Avoid very expensive breakdowns.
You no longer have to worry about the temperature of your engine, the Seymo control will do it for you.
It will warn you with a continuous alarm sound when the temperature exceeds the temperature established in the programming.
Installation is very simple and the temperature sensor with its perforated terminal fits like a washer under any screw, which is close to the cylinder head or the engine block.

.
Programmable engine temperature control:
Boat
Vehicle
Caravan
Truck
etc...
,
Operation:
You do not need to know the engine temperature specifications to set the overheating alarm.
Simply observe the highest temperature your engine reaches during normal driving, and then set the alarm to sound above this
Setting the maximum alarm temperature, when this is exceeded, it will warn acoustically and visually, thus avoiding damage to the engine
Example: if the digital display indicates 84 degrees (normal engine operating temperature) and we set it to 85, when this temperature is reached the alarm will be activated
The cylinder head gasket only needs two increases in temperature to burn.
It acts before the engine itself does, increasing safety and avoiding very costly breakdowns.
.
Detects any anomaly in the engine operation by temperature
Lack of cooling water
Leaking hoses
Faulty radiator
Faulty thermostat
Oil at inappropriate temperature
Faults in electro fan
Lack of seawater flow (Boats)
Connections: 12V or 24V power supply
the probe to the engine block on any screw
,
Characteristics
12v power supply optional 24v
Programmable alarm temperature from 0 to 115 degrees
Continuous digital temperature monitoring
Resolution 0.1 degree
Acoustic alarm exceeding programmed temperature
Visual alarm with LED on the display
Optional external buzzer
Optional external siren
Probe cable 2.5 meters (you can add up to 100 meters of cable extension of 2x0.75mm minimum diameter)
Mounting: recessed and surface
Dimensions. L x D x H = 74x70x34mm
.
Included:
Complete alarm for your installation:
CPU display with internal buzzer
Probe
2.5 meter wiring (extendable up to 100 meters with 2x0.75mm cable)
Installation manual.
,
Operation:
You do not need to know the engine temperature specifications to set the overheating alarm.
Simply observe the highest temperature your engine reaches during normal driving, and then set the alarm to sound above this
Setting the maximum alarm temperature, when this is exceeded, it will warn acoustically and visually, thus avoiding damage to the engine
Example: if the digital display indicates 84 degrees (normal engine operating temperature) and we set it to 85, when this temperature is reached the alarm will be activated
The cylinder head gasket only needs two increases in temperature to burn.
It acts before the engine itself does, increasing safety and avoiding very costly breakdowns.
,
Detects any anomaly in the engine operation by temperature
Lack of cooling water
Leaking hoses
Faulty radiator
Faulty thermostat
Oil at inappropriate temperature
Faults in electro fan
Lack of seawater flow (Boats)
.
Connections:
12V or 24V power supply
the probe to the engine block on any screw
.
Characteristics
12v power supply optional 24v
Programmable alarm temperature from 0 to 115 degrees
Continuous digital temperature monitoring
Resolution 0.1 degree
Acoustic alarm exceeding programmed temperature
Visual alarm with LED on the display
Optional external buzzer
Optional external siren
Probe cable 2.5 meters (you can add up to 100 meters of cable extension of 2x0.75mm minimum diameter)
Mounting: recessed and surface
Dimensions. L x D x H = 74x70x34mm
Included:
Complete alarm for your installation:
CPU display with internal buzzer
Probe
2.5 meter wiring (extendable up to 100 meters with 2x0.75mm cable)
Documentation: