Double programmable temperature alarm (two exhausts) or (exhaust and engine) or (two engines)

Engine temperature alarm (two exhausts) or (exhaust and engine) or (two engines) programmable, combines two sensors with the CPU with independent double programming,

OPTIONS:

12V or 24V

1st CONTROL TWO EXHAUSTS

2nd CONTROL ONE EXHAUST AND ENGINE BLOCK

3rd CONTROL TWO ENGINE BLOCKS

You can be observing the temperature of your engine continuously but at the slightest carelessness you will find yourself with an overheated engine

And possibly with a very expensive breakdown

You no longer have to worry about the temperature of your engine, the Seymo control will do it for you,

Alerting you with an alarm sound when the temperature exceeds the one established by you

Programmable temperature control for (two exhausts) or (exhaust and engine) or (two engines)

Boat

The engine temperature sensor with its perforated terminal fits like a washer under any screw, which is close to the cylinder head or the engine block and the Exhaust sensor fits on exhaust pipe or elbow

FunciAlarm:

You do not need to know the engine temperature specifications to set the overheat alarm.

Simply observe the highest temperature your engine reaches during normal navigation, and then set the alarm to sound above this.

Programming the maximum alarm temperature, when this is exceeded, it will warn acoustically and visually, thus avoiding damage to the engine.

Example for the engine: if the digital display indicates 84 degrees (normal engine operating temperature) and we program 85, when this temperature is reached the alarm will be activated.

The cylinder head gasket only needs two temperature increases to melt

It acts before the engine itself does, increasing safety and avoiding very costly breakdowns

Temperature in the exhaust pipe, advantages of this equipment over those on the market:

Easy assembly without removing any part of the exhaust, open the clamp and place it around the pipe or elbow and that's it.

• Programmable adapts to any exhaust
• Test operation without having to overheat the engine
• The sensor is not in contact with sea water and exhaust gases
• Reduced price
•  
• Operation:
•  
• Set the maximum exhaust temperature to adjust the overheating alarm. Simply observe
•  
• the highest temperature your exhaust reaches during normal navigation, and then set the alarm
•  
• to sound above this.
•  
• Example for exhaust: if the digital display indicates 84 degrees (normal operating temperature of the exhaust pipe) and we program 85, when this temperature is reached the alarm will be activated.
•  
• Exhaust alarm, if the sea water flow is insufficient for any reason, the temperature in the exhaust pipe will rise above the programmed temperature and the alarm will warn acoustically and visually, giving time to reduce speed, stop the engine, avoiding damage and very expensive repairs to the engine.
•  
• Detects any anomaly in the engine operation by temperature
•  
• Lack of cooling water in closed circuit
• Leaking hoses
• Faulty thermostat
• Oil at inadequate temperature
• Lack of seawater flow (Boats)
•  
• Available diameters:
• 316 stainless steel clamp continuous from 30 to 310mm
•  
• Example: from 30 to 310 mm, this closes up to 30mm and its maximum diameter is 310mm
•  
• If you do not know the diameter of the exhaust pipe, you can measure the circumference around the pipe in mm and divide by 3.142
•  
• Example: for a circumference of 500 mm
•  
• 500mm: 3.142 = 159.1mm, it would be within the range between 30 and 310mm
•  
• Connections: 12V or 24V power supply
•  
• The probe to the engine block on any screw.
• The exhaust probe around the exhaust pipe or elbow.
•  
• Features:
•  
• 12V or 24V power supply
• Double alarm temperature programmable from 0 to 120 degrees
• Resolution 0.1 degree
• Acoustic alarm exceeding programmed temperature
• Visual alarm with LED on the display
• Optional external buzzer
• Optional external siren
• 2.5 meter probe cable (you can add up to 100 meters of cable extension of 2x0.75mm minimum diameter)
• Mounting: recessed and surface
• Dimensions L x D x H = 74x70x34mm
•  
• Included:
•  
• Complete alarm for installation:
• CPU display with internal buzzer
• 2.5 meter wiring (extendable up to 100 meters with 2x0.75mm cable)
• Installation manual
• SELECT THE OPTION BEFORE ADDING TO CART:
• 12V or 24V
•  
• Option 1 two exhaust probes
• Option 2 Exhaust probe and engine probe
• Option 3 two engine probes