Programmable temperature control for motor
• Boat
• Vehicle
• Auto caravan
• Truck
• etc...
 
You may be observing the temperature of your engine continuously but at the least carelessness you will find the engine overheated
 And possibly with a very expensive breakdown
You no longer have to worry about the temperature of your engine, the Seymo control will do it for you,
 Notifying you with an alarm sound when the temperature exceeds the one established by you
The temperature sensor with its perforated terminal is adapted as a low washer of any screw, which is close to the cylinder head or the engine block

  
 
Functioning:
You do not need to know the engine temperature specifications to adjust the overheating alarm.
Just observe the highest temperature your engine reaches during normal driving, and then set the alarm to sound above this
Programming the maximum alarm temperature, when this is exceeded, it will notify acoustically and visually, thus avoiding damage to the motor
Example: if the digital display indicates 84 degrees (normal operating temperature of the motor) and we program 85, upon reaching this temperature the alarm will be activated
The cylinder head gasket only needs two temperature rises to melt
Acts before doing the motor itself, increasing safety and avoiding very expensive breakdowns
 
Detects any anomaly in the operation of the motor by temperature
• Lack of water cooling
• Sleeves with strands
• Defective radiator
• Defective thermostat
• Oil at inadequate temperature
• Failures in the fan
• Lack of seawater flow (Boats)
•
Connections: 12V or 24V power
                       the probe to the engine block in any screw
 
Features
• Optional 12v 24v power
• Programmable alarm temperature from 0 to 115 degrees
• Continuous digital temperature monitoring
• Resolution 0.1 degree
• Acoustic alarm exceeding programmed temperature
• Visual alarm with LED on the display
• Optional external buzzer
• Optional external siren
• 2,5 meter probe cable (can add up to 100 meters of cable extension of 2x0,75mm minimum diameter)
• Mounting: recessed and surface
• Dimensions.L x P x A = 74x70x34mm
 
Included:
• Complete alarm for installation:
• CPU display with interm buzzer
• Probe
• 2.5 meter wiring (extendable up to 100 meters with cable 2x0.75mm)
• Installation Manual